The Electric Flight Specialists
Your Basket
Hacker JetiBox
When connected to a Jeti SPIN controller it llows you to custom program your SPIN controller. Provides a readout screen for the data that is stored in the SPIN controller after a flight. Simple and intuitive to use, you will not need to drag a huge set of instructions or a computer to the flying field with you.
Jeti SPIN Box when not connected to a Jeti SPIN Controller
When used by itself, the Spin Box is a powerful testing tool:
Measure receiver channel output pulse widths.
Measure servo transfer speeds, either unloaded or in actual use in the aircraft.
Servo pulse generator, center your servos without receiver and transmitter.
Servo-cycler, check the function of your servos, from 10 to 990 cycles.
Setting up the Jeti SPIN Controllers using the SPIN Box
Simple controller setup: Select the type of aircraft from the menu on the "SPIN BOX", and timing, brake, etc., will be set automatically.
Advanced controller setup: gives complete setup freedom:
Timing: 0 to 30 degrees in 1 degree steps for any brushless motor type.
Acceleration: for how quickly the motor reaches full power.
Braking: can be set Off or On with selection of hardness.
Helicopter constant RPM: can be set for minimum and maximum rotor head RPM and how quickly the controller reacts to changes in RPM under load.
Battery type: and number of cells can be picked as well as the per cell cutoff voltage. Choose either Hard or Soft slow down at cutoff voltage.
Motor rotation: can be reversed from the controller. which is great for motor systems where access to the motor/speed controller is difficult.